| April 6, 2000 |
|
The toxic mold's real name is stachybotrys atra, but most seem to call it toxic mold. According to the Centers for Disease Control (CDC), this kind of mold was possibly linked with severe lung disorders in children several years ago. There have been other reports of alleged sickness since. This newly talked about toxic mold has been associated with lung problems and possible memory loss. However, the CDC advises that the link between this mold and the reported sickness is not conclusive. What this means is that it is possible that certain molds can causes serious health problems. But at this point, it is not clear that this is the case. All is certainly not to fear. Mold, is mold, is mold. The CDC advises that all mold should be taken seriously and removed. That this super-mold produces a toxin which may make people unusually sick is not the issue. The issue is that ALL mold should be adequately addressed. The CDC informs us that there are roughly six varieties of household molds. The difficulty is that homeowners cannot distinguish between the more caustic molds and the benign molds. Toxic or not, mold generally takes the appearance of black or grey patches. When the mold is found in small quantities, it can be a removed with a mild bleach solution. One cup of bleach added to one gallon of water has been suggested. Remove mold by scrubbing it with the solution. Eye protection should be warn as also should a respirator with carbon filters. If the mold mass is large or has infested your drywall or carpeting, the materials may have to be removed. In such cases, homeowners might do best by looking for companies that specialize in flood damage or insulation removal. Search for experienced contractors. According to the CDC, there is always a little mold everywhere in the air and on many surfaces. The CDC reports that alleged toxic-mold cases are very rare. For many, household molds produce an allergy like symptom. For others, household mold does not seem to bother them one way of the other. New molds grow naturally in basements and other chronically damp areas such as bathrooms. They can enter homes through ventilation and air conditioning systems. Mold spores can also gain indoor entry by attaching to clothing, shoes, suit cases, and other convenient vehicles. While mold is unavoidable, by reducing moisture you can at least make your home less mold-friendly. Suggestions for doing so include: maintaining indoor humidity below 50 percent, using air conditioners and humidifiers during humid months, maintaining adequate ventilation including the use of bathroom and kitchen fans, and adding mold inhibitors to paints. When mold grows out of control, it can create a variety of problems. In 1998, a county courthouse in Florida was the focus of a large indoor air quality investigation which ultimately hinged on mold and fungus that was released into the air. According to published reports, a leaking air conditioning system was responsible for the creation of a wet environment that supported excessive mold growth. Of 585 employees in the building, at least 20 reported becoming ill as a result of poor indoor air quality problems. In the past ten years, health officials have started paying close attention to indoor air quality issues. "Sick Building Syndrome" claims are becoming increasingly common, and that trend will likely continue as scientists develop an increased understanding of these issues. Mold concerns fall into this category and should not be ignored. |
With an award winning staff of writers providing up to the minute real estate news and advice, thousands of REALTORS® in North America reporting daily market conditions, and a nationally broadcast television news program, Realty Times is the one-stop shop for real estate information. That's why over 10,000 real estate professionals have turned to us for their publicity needs.