How does professional carpet cleaning work? This is the question that haunts both individuals and businesses that cannot quite decide whether or not a deep clean is worth the investment. The actual process is both startlingly straightforward and surprisingly complicated. You can actually separate it into two primary steps, namely:
-
Pretreatment
Before you can apply a carpet cleaner to a dirty carpet, it must be treated. That involves soaking it in a cleaning solution. These chemicals are normally stored in bottles that you can use to spray the carpet. Let the solution sit in the carpet for ten to fifteen minutes before proceeding.
-
The Carpet Cleaner
Once the cleaning solution has properly soaked into the carpet, apply the carpet cleaner. Most of these devices have large wands that must be pointed towards the carpet and used to suck up the dirt and the grime. However, before the carpet cleaner can attract your carpet’s dirt, it must first pump water into the carpet. It is this water that the carpet cleaner eventually sucks up, taking all the dirt and the grime along with it. The purpose of the cleaning solution is to loosen the foreign elements in the carpet. That way, they won’t resist the carpet cleaner’s sucking effect once you deploy the device.
How Does Professional Carpet Cleaning Work? - Get Rid of Buildup in Your Carpet
While professional carpet cleaning only requires these two steps, there are several preparatory actions that you must first execute before proceeding with the actual cleaning, the most important being the acquisition of your tools. This includes:
The Vacuum/Recovery tank
This is the most critical element of any carpet cleaner. It is responsible for drawing the water with its dirt and grime out of the carpet. The vacuum is connected to a recovery tank where the dirty water and the cleaning solution are deposited.
Pump
This element is responsible for injecting water into the carpet.
Wand
This is the tool you use to either pour water into the carpet or suck it up.
Heater
Some professional cleaners use warm or hot water to rinse the carpet at the end.
What You Should Keep in Mind
If you are new to professional carpet cleaning, you need to keep some of these factors in mind:
Select the cleaning solution carefully. Take the type of carpet into account. Some cleaning solutions could end up damaging your carpet, or lead to spots if not properly dried.
The motors that drive the vacuums of carpet cleaners come in many configurations. The configuration you choose to prioritize will determine the efficacy of the cleaning process. Most professionals recommend motors with two stages minimum.
When selecting your vacuum, you must also consider the airflow and the water lift. The water lift, in particular, is very important because it will affect the suction strength of your carpet cleaner.
When selecting the heater, you have to choose between a unit that warms/heats the water in a solution tank, or one which warms/heats the water as it leaves the carpet cleaner. Regardless of your choice, you are discouraged from using hot water on natural fibers during the cleaning process. Material like wool doesn’t appreciate excessive heat. In fact, hot water is best utilized in synthetic carpets. Synthetic material can contend with the rigors of heated water and harsh cleaning chemicals.
Bottom Line
Even though professional carpet cleaning seems easy, it still requires experience. Yes, all you need is a carpet cleaner that can pump water into the carpet and then suck it out. So, how does professional carpet cleaning work? Knowing about deep cleaning will help you know which cleaning solution to buy, and help you better understand what carpet cleaners are safe for your carpet type.
