Advertisement
Thursday, 19 September 2019
Agent Resource Center
This Old House - Do-it-Yourself

How To Convert Two-Handle Kitchen Faucet To Single Handle

Written by Posted On Friday, 13 September 2019 08:53

Quite a number of kitchen faucets have two handles. While they are more convenient while discharging the water output, they are also cumbersome to engage. That is why you will usually want to convert yours to a single-handle.

In our discussions here below, we are going to look into the steps to follow to achieve this noble end. First and foremost, you will have to equip yourself with the necessary gears and also put on the right protective attire.

Tools and Materials Required

  • Apron
  • Pliers
  • Wrench
  • Sealant
  • Screwdrivers

Step-by-step Procedures

Step I: Switch off the Water Supply

Kick the exercise off by switching off the water supply. This way, you will be able to work without any possibility of soiling your room or predisposing your kitchen to the risks of water damage.

For more reliable end results, you are advised to get to the main water supply. It is at this point that the water shall be effectively stopped from getting to the faucet in the first place.

Step II: Identify and Unscrew the Redundant Handle

Identify and unscrew the redundant handle. The redundant handle is that which you no longer find useful for your course. It is the one which you want to do away with. Simply skim the two and narrow down to the specific one of your choice.

Scrutinize and sturdy this handle keenly to find out the best way to go about unscrewing it. Then, make use of the wrench of the set of pliers to do the job. Uphold some great care as you go about the issue.

Step III: Seal the Gaping Hole

You will remain with some gaping hole after unscrewing the redundant faucet. You have to take care of this hole somehow. You will have to look for a suitable metal and sealant. Mark out the dimensions and configuration of the hole for a start.

Then, cut the metal as per the dimensions and configurations you will have arrived at earlier. Then, slot this metal in the space left behind in the best brand of kitchen faucet. Apply some sealant and the screw tightly to fit. Leave to dry for some time.

Step IV: Test the System

Finish off by testing the system. To do this, turn on the faucet and let the water flow. Start off slowly and vary the intensity intermittently until the knob is full-throttle. Note how the hole you sealed responds to the water volume.

In case there are any gaps left, you might have to redo a step or two above. These might include apply more sealants or re-tightening the screws. Do so until you obtain the outcomes that are desirous to you.

CONCLUSION

Converting a double handle kitchen faucet to a single handle is simple yet potentially dangerous undertaking. The main issue you have to take care of is the sealing of the hole that remains after the redundant handle is eliminated.

Then for best results, we ask that you go slow and also consult your manufacturer’s manual extensively. It is only in this way that you will be able to avoid any accidents. Best of luck as you set out! Visit here https://faucetsview.com/ for more guides about kitchen faucets

Listing Additional Info

  • State: Iowa
  • Address: Hardesty, Street
  • City: USA
  • Zipcode: 12210
  • SOLD: no
  • MLS #: 12210
Rate this item
(0 votes)
Set it and forget it Marketing, Agent Trusted for 21 years. Click Here

Search by State:

Agent Resource

How to capture your next prospect - click here

Realty Times

From buying and selling advice for consumers to money-making tips for Agents, our content, updated daily, has made Realty Times® a must-read, and see, for anyone involved in Real Estate.