How to Remove Ink from Carpet?
How to remove ink from carpet? Well, the easiest way of dealing with an ink spill on the carpet is rubbing some alcohol onto the affected area. This method works best when used right after the spill. What’s more it’s also a much eco-friendlier method than using cleaning chemicals for removing stains. Below are the steps you should follow to remove ink from your carpet using alcohol.
Step 1:
Soon after the spill, get a piece of clean cloth and enough rubbing alcohol. Metro Cleaning suggests you soak a corner of that cloth in the alcohol and use it for blotting the stain. Never commit the mistake of scrubbing the stain; doing so would end up exacerbating the problem. Gently dab the soaked cloth at the ink stain so that the fibers of the cloth absorb the liquid.
Step 2:
Keep dabbing the cloth over the stain and along the way re-wet the rag from time to time by soaking it into the alcohol. Do this for 20 to 30 minutes and then wait for another half an hour for the alcohol to sit on the carpet. Waiting is mandatory for allowing the liquid to eat up the spot completely.
Step 3:
To prevent the carpet from getting damaged, rinse the stained and treated area using vinegar and warm water. Mix enough vinegar with water in the ratio of 1:16 and use the mixture for rinsing the stained area. Constant rubbing of alcohol might dry the carpet out; rinsing would stop the carpet from getting dry.
Step 4:
If you see that the stain is completely gone, give the area of the carpet a final rinse; this time it should washed just by using clean water. Allow the carpet to dry and if your see the fibers get slightly wonky vacuum the treated area.
Step 5:
If the above steps failed to remove the step completely, you will need to use another ingredient. This time, you will need to use shaving cream. Cover the stain with enough shaving cream and allow the ingredient to sit. After 15 to 20 minutes, scoop the shaving cream away gently and blot the area using
the same vinegar and water mix you used in step 3. Step 5 should surely remove the stain and you should repeat step 4 for getting the carpet ready for you.
Tips and Tricks
The above tips and tricks for, how to remove ink from carpet, might fail if the ink stain is a few days old. In such cases, you should spray a lubricant like Trifold or WD-40 onto the spot. These ingredients are often used for removing stains from commercial flooring containing carpet. However, it must be noted here that you must perform a patch taste on an invisible part of the carpet before beginning this ink removal method. Patch test is necessary as there are certain materials that react badly with lubricant and get ugly stains permanently. Out of the two lubricants mentioned above, WD-40 is known to be the milder and safer option. Whatever might be the lubricant you are using, don’t forget to wash it off well using water and soap.
Conclusion
To conclude, we would however like to affirm that alcohol is the safest and most effective ingredient for removing ink stain if the stain is not too old.
